FabConstruct Anti-Glare-Spray

Prepare objects for 3D scan.

Because of the fine-grained structure of this spray, it is possible to spray an even layer with minimal thickness onto the scan object. The average particle size is 2.8 μm.

The 3D Scan Spray is glare-free and easy to remove.

The FabConstruct Matting Spray creates a white opaque coating to prepare shiny, reflective and very dark objects for the 3D scan.

Simply spray a thin layer from a distance of approx. 20-30 cm onto the surface of the object that you want to be matt and light.

FabConstruct matting spray – No problem even for fine scans.

In the thin layer, the fine surface details of less than 0.2 mm in size are not lost. The coating is easily washed off with a brush or water and sponge.

Do not inhale the spray! Only use the spray outdoors and/or use respiratory protection (fine dust).
The spray can attack very sensitive materials or get stuck in rough surfaces. A permanent change (e.g. fading) of the surface cannot be ruled out! Therefore, test spraying and removing on small areas or worthless objects first.

---